LBL Lighting Constellation Grande SCF User Manual
Constellation grande (compact fluorescent), Assemble the fixture, Installation instructions for

1
Installation Instructions for
Constellation Grande (Compact Fluorescent)
1.0
980CONSTGSCF
CAUTION - RISK OF FIRE
This product requires installation by a qualified
electrician. Before installing be sure to read all
instructions and TURN THE POWER TO THE
ELECTRICAL BOX OFF.
Suspension
LP747_CF
G
P
I
:
ENERAL
RODUCT NFORMATION
This product is suitable for damp locations.
Assemble the Fixture
1A
Loosen the two set screws on the stopper at the bottom
of the cable post aircraft cable using the provided Allen
wrench.
Determine the desired height of the fixture, move the
stopper to the determined location, and tighten the two
set screws on the stopper.
Take note of the
NOTE:
height measurement, it will be needed for the canopy
aircraft cable.
Cut off the excess aircraft cable.
Ensure that the rubber grommet is in place and install
the separate aircraft cable into the shade.
Feed the open end through the small hole in the shade
and pull it all the way through until the stopper is
reached.
2
1
2
2
2
3
2
4
2
5
SET SCREW
STOPPER
RUBBER
GROMMET
AIRCRAFT
CABLE
SHADE
5
3
4
1B
Disassemble the socket assembly by unscrewing the cap
and separating the socket, bracket, and the cover.
6
CAP
SOCKET
BRACKET
COVER