Maintenance, Remarks, Warranty – ROHM Jaw cutting attachment User Manual
Page 5
5
c) Reversing the
BAV jaws
• Turn knurled ring
anti-clockwise and
remove jaws.
• Reverse jaws (bolt
heads facing out-
ward) and reinstall
as follows:
• Jaw 3 in slot 1,
• jaw 2 in slot 2,
• jaw 1 in slot 3
while
• turning the knurled
ring clockwise
again.
d) To speed up
the rotation of the
knurled ring, insert
a 6 mm round bar
or drift punch into
the hole provided for
that purpose in the
face of the knurled
ring and use it as a
crank.
Maintenance
Periodically apply a
small amount of oil
to the scroll thread,
removing the jaws.
Always insert the
bolt heads of the
setting jaws into the
counterbores of the
soft jaws as far as
they will go.
To avoid damage,
do not exceed the
suspension ranges.
Remarks
a) Turning the
steps or outside
diameters of soft
solid jaws
The BAV jaw cutting
attachment may also
be used for turning
solid jaws. In that
case, the user should
drill one hole each, in
the front face of the
jaws. The position of
these holes depends
on the desired step
turning range. (The
position of the hole
to be drilled can
be marked with a
scriber).
b) Grinding harde-
ned jaws
Similarly, the BAV
cutting attachment
may be used for re-
grinding jaw steps. In
that case, excessive
dirt on the setting
jaw serrations must
be avoided. (Remove
dust with a brush
from time to time).
c) Working range
At least 2 cutting
attachments are
required to cover the
complete working
range (chucking
range) of the chuck
and jaws.
Warranty
Parts which give rise
to justifi ed claims on
account of verifi ed
material defects or
faulty workmanship
within a period of
6 months will be
replaced by us free
of charge.
1)
screw material 12.9
2)
light-duty design
Type
Size
0
1)
1
2
3
4
5
091
Ident. No.
220206
220207
220208
220209
220210
220211
Attachments´s
outer dia.
153
176
215
244
290
342
inner dia.
110
110
135
162
208
260
J Ø
from
50
35
70
100
145
160
Suspension distance
to
115
125
140
175
215
270
mm
A Ø
from
150
170
215
240
290
330
to
215
260
285
315
360
440
Width
B
22
31
31
31
31
31
Scrwe head dia D
2)
8,5
13
13
13
13
16
Thread
M 5
M 8
M 8
M 8
M 8
M 10
Weight approx. kg
1,5
3,3
5,2
5,6
6,8
8,3
Used mainly with chucks up to dia.
250
315
400