Siemens LI48932 User Manual

Page 20

Switching over from exhaust air to circulating air mode

Switching the electronic control system
to circulating air mode:
❑ The extractor hood has been set to

exhaust air mode at the factory.

❑ Before the mode can be changed, the

extractor hood must have been
connected and should be switched off.

1. Press and hold down the

button.

2. Press the button for approx.

3 seconds.
❑ A

is displayed.

3. Release the buttons.

❑ The display goes out shortly

afterwards.

Resetting to exhaust-air mode:
1. Repeat the procedure.

❑ A

is displayed.

2. Release the buttons.

❑ The display goes out shortly

afterwards.