Simple troubleshooting, Insert brewing unit – Siemens TE509501DE User Manual
Page 43
43
de
en
Problem
Cause
Solution
Water dripped onto the in
ner floor of the appliance
when the drip tray (8) was
removed.
Drip tray (8) removed too
early.
Wait a few seconds after
the last drink was dispensed
before removing the drip
tray (8).
Display shows
Insert brewing unit
Brewing unit (5) is missing
or was not recognised.
Switch off the appliance with
the brewing unit (5) in place,
wait three seconds and
switch on the appliance.
Restore the unit to its
original factory settings
(“Reset”).
You changed some settings
and want to discard them.
Turn off the unit with
the power on/off switch
O / I (9). Press and hold
the
e
off /
j
(13) and the
h
(12) button and turn
the appliance on with the
power on/off switch
O / I (9).
Confirm by pressing the
start button
start (10).
The factory settings are now
activated.
If you are unable to solve the problem, please call the hotline.
You will find the telephone numbers at the back of these instructions.
Simple troubleshooting
TE506_1DE.indb 43
20.06.2012 11:58:03