Siemens TE509501DE - Manual (Page 31)

31
de en
You can set the following:
Shut off : Here you can set the time
span after which the appliance automati­
cally switches off following the last drink
preparation. A time between 15 minutes
and 4 hours can be set. The default time is
1 hour, but this can be shortened to save
energy.
Filter : Here you can set whether a water
filter is being used. If a water filter is not be­
ing used, turn the setting to No / Old . If a
water filter is being used, turn the setting to
Activate filter . New water filters have to
be rinsed before use (see “Water filter” on
page 30).
Start Calc‘n‘Clean : The service pro­
grammes ( Calc‘n‘Clean / descaling /
cleaning ) can be selected manually here.
Press the start button (10) and run the
selected programme (see “Service Pro­
grammes” on page 36).
Temp. : The brewing temperature ( high /
middle / low ) can be set here.
Language : The display language can be
set here.
Water hardness : The water hardness
setting can be adjusted on this appliance.
It is important to set the water hardness
correctly, so that the appliance indicates
accurately when the descaling programme
should be run. The factory setting for the
water hardness is 4.
You can check the water hardness using
the enclosed test strip or by asking your
local water supplier.
Dip the test strip briefly in water, gently
shake off any drips, and check the result
after one minute.
Level Water hardness
German (°dH) French (°fH)
1
2
3
4
1­7
8­14
15­21
22­30
1­13
14­25
26­38
39­54
Drink counter : This displays how many
drinks have been dispensed since the appli­
ance was first put into operation.
Adjusting the grinding
unit
The rotary selector (3) adjusts the grind set­
tings from coarse to fine.
¡
Warning!
Adjust the grinding unit only while it is
running! Otherwise the appliance may be
damaged. Do not reach into the grinding
unit.
● While the grinding unit is running, adjust
the rotary selector (3) from fine ( a: Turn
anticlockwise) to coarse ( b: Turn clock­
wise) as required.
a b
Note: The new setting will not become ap­
parent until after the second cup of coffee.
Tip: For dark roast coffee beans, choose a
finer grind, for lighter beans a coarser grind.
TE506_1DE.indb 31 20.06.2012 11:57:58