Siemens KI38CA50 - Manual (Page 26)

26
Interior fittings
of refrigerator
compartment
You can vary the shelves inside the
refrigerator compartment and the door
shelves as and when required: Pull the
shelf forwards, lower and swing out to
the side, Fig. 5. Raise the door shelf and
remove, Fig. 6.
Special features
(not all models)
Vario shelf
Fig. 7
The front half of the Vario shelf can be
taken out. You can then place tall items
(e.g. cans, bottles) on the shelf below.
Drawer for cold mkeats and cheese
Fig. 8
To remove the drawer, lift and pull out.
The holder can be moved.
Bottle holder
Fig. 9
The bottle holder prevents bottles from
falling over when the door is opened and
closed.
Vegetable container with temperature
and humidity regulator
Fig. 0
For longĆterm storage of vegetables,
lettuce and fruit slide the regulator all the
way to the right. Ventilation aperture is
open Ć low air humidity - Temperature
drops.
For shortĆterm storage slide the regulator
to the left. Ventilation aperture is closed Ć
high humidity - Temperature rises.
Small accessories holder
Fig. q
Small bottles, containers, etc. can be
prevented from falling over by wedging
them into the holder.
Bottle holder in the coldĆstorage
compartment
Fig. w/A
Preferably large bottles in front of the
bottle holder, e.g. wine and juice bottles,
only small bottles behind the partition, e.g.
beer bottles.
Important: For reasons of safety and
stability do not remove partition.
en