Matrix Orbital VK204-25 Legacy - Manual (Page 31)

6.8 Initialize Large Numbers
Syntax Hexadecimal 0xFE 0x6E
Decimal 254 110
ASCII 254 “n”
Description This command will load the default large number characters into the
volatile memory. If you have stored your own custom large numbers,
use the ’Load Custom Characters’ command instead to load your
custom character data into the volatile memory. This command will
allow you to use the ’Place Large Numbers’ command.
Remembered No
6.9 Place Large Number
Syntax Hexadecimal 0xFE 0x23 [Col] [Digit]
Decimal 254 35 [Col] [Digit]
ASCII 254 “#” [Col] [Digit]
Parameters Parameter Length Description
Col 1 The column number.
Digit 1 Large number to place (0-9).
Description This command will place a large number (four columns high) at the
[row] and [col] specified.
NOTE Large Numbers must be initialized before this command is executed.
Remembered No
6.10 Initialize Horizontal Bar
Syntax Hexadecimal 0xFE 0x68
Decimal 254 104
ASCII 254 “h”
Description This command will load the default horizontal bar characters into the
volatile memory. If you have stored your own custom horizontal bar
data, use the ’Load Custom Characters’ command instead to load your
custom bar data into the volatile memory. This command will allow you
to use the ’Place Horizontal Bar’ command.
Remembered No
Matrix Orbital VK204-25-USB 27