Matrix Orbital VK204-25 Legacy - Manual (Page 25)

5.6 Set Auto Line Wrap On
Syntax Hexadecimal 0xFE 0x43
Decimal 254 67
ASCII 254 “C”
Description Enabling Auto Line Wrap will allow the cursor to automatically wrap
over to the next line when the current line is full.
NOTE Line wraps may occur in the middle of a word.
Remembered Yes
5.7 Set Auto Line Wrap Off
Syntax Hexadecimal 0xFE 0x44
Decimal 254 68
ASCII 254 “D”
Description Disabling Auto Line Wrap will allow you to change the line
configuration. The normally sequentional progression becomes an
alternating pattern. Rather than moving from line 1 to 2 to 3, the display
will write from line 1 to 3 to 2. For a two line display, this means that a
row’s worth of characters written between the first and second lines or
after the second will not be displayed on the screen or wrapped. The
four line models will see only an alteration in line flow.
Remembered Yes
5.8 Set Cursor Position
Syntax Hexadecimal 0xFE 0x47 [col] [row]
Decimal 254 71 [col] [row]
ASCII 254 “G” [col] [row]
Parameters Parameter Length Description
col 1 Column
row 1 Row
Matrix Orbital VK204-25-USB 21