Matrix Orbital VK204-25 Legacy - Manual (Page 30)

Description Using this command you may create the custom characters. that will be
stored in memory bank zero, which will be used in the startup screen.
For more information about creating custom characters see Section 6.2
on page 23.
NOTES
• Changes only take place once the power has been cycled.
• This command is the same as sending CMD 254 / 193 / 0 / [ID] / [DATA]
Remembered Yes
6.6 Initialize Medium Number
Syntax Hexadecimal 0xFE 0x6D
Decimal 254 109
ASCII 254 “m”
Description This command will load the default medium number characters into the
volatile memory. If you have stored your own custom medium numbers,
use the ’Load Custom Characters’ command to load your custom
character data into the volatile memory. This command will allow you
to use the ’Place Medium Numbers’ command.
Remembered No
6.7 Place Medium Numbers
Syntax Hexadecimal 0xFE 0x6F [Row] [Col] [Digit]
Decimal 254 111 [Row] [Col] [Digit]
ASCII 254 “o” [Row] [Col] [Digit]
Parameters Parameter Length Description
Row 1 The row number.
Col 1 The column number.
Digit 1 Medium number to place (0-9).
Description This command will place a medium number (two columns high) at the
[row] and [col] specified.
NOTE Medium Numbers must be initialized before this command is executed.
Remembered No
Matrix Orbital VK204-25-USB 26