Matrix Orbital VK204-25 Legacy - Manual (Page 29)

Description New to the VK204-25-USB has added five non-volatile memory banks
for custom character storage. This is intended to allow you to create
your own custom bar graphs, medium/large numbers and startup screen.
However, each memory bank may be used to store a set of any eight
custom characters; with the only provision being that memory bank zero
contains the characters that will be used in the startup screen. By default
the memory banks will be loaded as follows:
[Bank] Description
0 Startup screen characters.
1 Horizontal bars
2 Vertical bars
3 Medium numbers
4 Large numbers
In order to save new custom characters into a memory bank, follow the
same process as you would for creating a custom character, see Sec-
tion 6.2 on page 23, only use 254 193 [Bank Number] before sending the
[ID] and character [Data].
Remembered Yes
6.4 Loading Custom Characters
Syntax Hexadecimal 0xFE 0xC0 [Bank]
Decimal 254 192 [Bank]
Parameters Parameter Length Description
Bank 1 Memory bank to save to (0-4).
Description This command is used to load the custom characters into the volatile
memory so that they may be used. If custom bar graph or number
characters are stored in the memory banks, this command may be used
instead of initializing the bar graph / number. To use this command send
the command bytes followed by the [Bank] that contains the custom
character data that you want to retrieve.
Remembered No
6.5 Save Startup Screen Custom Characters
Syntax Hexadecimal 0xFE 0xC2 [refID] [data]
Decimal 254 194 [refID] [data]
Parameters Parameter Length Description
refID 1 Character reference ID (0-7).
data 8 Character data.
Matrix Orbital VK204-25-USB 25