Ashcroft Options - Manual (Page 5)

265 264
Consult factory for guidance in product selection
Phone (203) 378-8281 or visit our web site at
www.ashcroft.com
Consult factory for guidance in product selection
Phone (203) 378-8281 or visit our web site at
www.ashcroft.com
Ashcroft ® Accessories
2 1 /
2
˝ & 3 1 /
2
˝ TYPE 1009 DURALIFE TOOLS
Pointer puller screw/pin
P/N 112A381-01
Pointer puller body
P/N 292A133-01
Pointer staker
P/N 188A101-01
Span wrench
old design
P/N 266A137-01
2 1 /
2
˝ Ring wrench
old design
PN 266B135-01
3 1 /
2
˝ Ring wrench
old design
PN 266B134-01
2 1 /
2
˝ Ring removal
current design
PN 101B221-02
3 1 /
2
˝ Ring removal
current design
PN 101B221-01
2 1 /
2
˝ & 3 1 /
2
˝ Nest old design
PN 266B136-01
2 1 /
2
˝ Nest current design
PN 101B220-02
3 1 /
2
˝ Nest current design
PN 101B220-01
Ring Wrench – 4 1 ⁄
2
˝
(For installing front threaded rings in
4 1 ⁄
2
˝ Duragauge gauge)
TYPE A-1285
Ring Wrench – 6˝
(For installing front threaded rings in
6˝ Duragauge gauge)
TYPE A-1286
TYPE A-1286
TYPE A-1285
FOR:
4
1 ⁄
2
˝ 1279, lower connected –
order part no. 101A202-01.
4
1 ⁄
2
˝ 1279, back connected –
order part no. 101A2023-01.
4
1 ⁄
2
˝ 1379, lower connected –
order type A1280 Kit.
4
1 ⁄
2
˝ 1379, back connected –
order type A1283 Kit.
6
˝ 1379, lower & back connected –
order type A1284 Kit.
HOW TO ORDER THIS CONVERSION KIT
Availability
Use with Code Mounting
Ashcroft Description 45 60
Model No. 4 1 ⁄
2
˝ 6˝ Stem Flush
Dial Dial
1279 Duragauge X — X X (1)
1377 pressure X X — X
1379 gauge X X X X (1)
1125 D/P gauge X X X X
Surface Flush
600A-02 Duratemp X X — X
600A-03 remote X X X X
600A-04 thermometer X X X X
“O” Ring
Elastomeric
Diaphragm
With Integral
“O” Ring
Acrylic
Window
Threaded
Ring
Rear
Cover
For field converting 4 1 ⁄
2
˝ 1279(*)S and
4 1 ⁄
2
˝ and 6˝ 1379(*)S Duragauge ®
gauges to a sealed case design
suitable for either hermetic sealing or
liquid filling. Kit includes (Typical A1280
kit shown):
• O-ring for front case seal.
• Acrylic window.
• Elastomeric diaphragm (Buna-N) for
rear case seal.
• Glass filled polypropylene threaded
ring for rear of case.
• 302 stainless steel rear cover
and mounting screws.
• 303 stainless steel and Monel
throttle screws.
CONVERSION KIT
Model Code Contact arrangements
XED High and low contact
2265
XEE Double high contact
XEF Double low contact
XEG “OFF” at low and high,
and “ON” in between
The Ashcroft ® 2265 electric contact is
an ideal accessory to turn on a signal
light, sound an alarm, or operate a pump
or valve. The contacts can easily be set
so that a circuit can be closed or opened
at a desired pressure or temperature.
Settings can be easily made in the
field without removing the instrument
from service. Contact adjustment is made
externally with a removable key to make
the instrument virtually tamper proof.
The contact is designed for easy
installation on Types 1279, 1377 and
1379 Duragauge pressure gauges
(either stem or flush mounted), Type
1125 differential pressure gauges, or
Type 600A Duratemp dial thermometers.
Contacts are equipped with adjustable
magnets to eliminate chatter caused by
vibration. A plug-in connector with five
feet of electrical cable is standard.
(1) Flush mounting requires type 1278 flush mounting ring.
All specifications are subject to change without notice.
Indicating accuracy of Ashcroft Duragauge,
above 300 psi with contact: Pointer not
carrying contact – 1.0%.
Pointer carrying contact – 1.5%. For ranges
below 30 psi, add an additional 1 ⁄
2
% to
indicating accuracies.
ELECTRIC WARNING CONTACTS
Ashcroft ® Accessories
250V Maximum Voltage
30 WDC Maximum Switching Power
50 VA AC Maximum Switching Power
1A Maximum Current
ELECTRICAL CONTACT SWITCHING CAPACITY