Chapter 4. wds mode configuration, 1 external network connection, 1 network requirement – Airlink101 APO1010 User Manual
Page 58
53
Chapter 4. WDS Mode Configuration
Please refer to illustrations of the section 1.3 for possible applications in the WDS mode. This section provides detailed
explanation for users to configure in the WDS mode with help of illustrations. In the WDS mode, functions listed in the table
below are also available from the Web-based GUI interface.
Option System
Wireless
Utilities
Status
Operating Mode
General Settings
Management
System Overview
LAN
Advanced Settings
Profiles Settings
WDS Status
Time Server
WDS Setup
Firmware Upgrade
Extra Info
SNMP
Network Utility
Event Log
Functions
UPnP Reboot
Table 4-1: WDS Mode Functions
4.1 External Network Connection
4.1.1 Network Requirement
You could expand your Ethernet network via WDS link. In this mode, the APO1000/APO1010 connects directly to a wired
LAN, and wirelessly bridges to a remote access point via a WDS link as shown in Figure 4-1. In the mode, it can’t associate
with any wireless clients.
F
i
g
u
r
e
4-1 Point to Point Configuration
APO1000/APO1010