Airlink101 APO1010 User Manual
Page 132
127
Queue
Data Transmitted
Clients to AP
IP
ToS
802.1P
Priority
Priority
Description
AC_BK
Background.
0x08
0x20
1, 2
Low
High throughput. Bulk data that requires maximum
throughput and is not time-sensitive is sent to this queue
(FTP data, for example).
AC_BE
Best Effort
0, 3
Medium
Medium throughput and delay. Most traditional IP data is
sent to this queue
AC_VI Video
0x28
0xa0
4, 5
High
Minimum delay. Time-sensitive video data is automatically
sent to this queue
AC_VO Voice
0x30
0xe0
0x88
0xb8
6, 7
High
Time-sensitive data like VoIP and streaming media are
automatically sent to this queue
Maximum Clients : The default value is 32. You can enter the number of wireless clients that can associate to a
particular SSID. When the number of client is set to 5, only 5 clients at most are allowed to connect to this VAP.
Security Type : Select the desired security type from the drop-down list; the options are Disable, WEP, WPA-PSK,
WPA2-PSK, WPA-Enterprise, WPA2-Enterprise and WEP 802.1X.
Î
Disable : Data are unencrypted during transmission when this option is selected.
Î
WEP : Wired Equivalent Privacy(WEP) is a data encryption mechanism based on a 64-bit, 128-bit or 152-bit shared
key.
9
Key Length : The available options are 64 bits, 128 bits or 152 bits.
9
WEP auth Method : Enable the desired option among Open system and Shared.
9
Key Index : key index is used to designate the WEP key during data transmission. 4 different WEP keys can be
entered at the same time, but only one is chosen.
9
WEP Key # : Enter HEX or ASCII format WEP key value; the system supports up to 4 sets of WEP keys.
Key Length
Hex
ASCII
64-bit
10 characters
5 characters
128-bit
26 characters
13 characters
152-bit
32 characters
16 characters