Airlink101 APO1010 - Manual (Page 142)

137
6.4.4 Configure SNMP Setup
SNMP is an application-layer protocol that provides a message format for communication between SNMP manager and
agent. By enabling SNMP function, the administrator can obtain the system information remotely.
Please click on System -> SNMP Setup and follow the below setting.
„ SNMP v2c Enable: Check to enable SNMP v2c.
Î ro community : Set a community string to authorize read-only access.
Î rw community : Set a community string to authorize read/write access.
„ SNMP v3 Enable: Check to enable SNMP v3.
SNMPv3 supports the highest level SNMP security.
Î SNMP ro user : Set a community string to authorize read-only access.
Î SNMP ro password : Set a password to authorize read-only access.
Î SNMP rw user : Set a community string to authorize read/write access.
Î SNMP rw password : Set a password to authorize read/write access.