Assembly, 6 assembly, Start – Wagner ProCoat 9185G User Manual

Page 6: You will need

English

1. Assembly

Start

1. Insert the ends of the hose

bracket into the holes of the

handle as shown.

2. Remove the plug from inside

the hose fittings and remove the

cap on the outlet valve. Discard

both.

5. Thread the other end of the

hose to the spray gun. Hold

the gun with one adjustable

wrench, and tighten the hose

nut with the other.

4. Hold the port with an

adjustable wrench, and

tighten the hose with the

other.

3. Thread one end of the high

pressure spray hose to the

spray hose port.

You will need:

• Two adjustable wrenches
Note: It will be much easier to

attach the hose to the sprayer if

you uncoil it first.