Cleanup - latex materials 2 – Wagner ProCoat 9185G User Manual
Page 17
English
17
5. Remove the inlet filter from
the suction tube and place
it into waste container.
6. Thread pump cleaning
adapter onto garden hose.
Thread suction tube fitting
over the adapter.
7. Unclip the return tube from the suction tube
and place it into the waste container. Turn
the PRIME/SPRAY knob to PRIME.
8. Turn the water supply to the garden hose on.
Start the engine (see page 4).
Water will go into the suction tube and out
through the return tube. Let the pump run
for a few minutes, and leave pump running
for next steps.
9. Point the spray gun at the side of
a waste container.
10. While squeezing the trigger, turn the
PRIME/SPRAY knob to SPRAY.
11. Continue squeezing the trigger
until fluid is coming out clear.
Move on the Cleaning the Spray
Gun Components, page 19.
5
6
7
8
9
SPRAY
PR
IM
E
10
11
12
SPRAY
PR
IM
E
SPRAY
PR
IM
E