AT&T E2562 - Manual (Page 16)

14
Telephone Operation
Handset settings
Ringers
At this menu you can set default ring volumes, or turn the
ringer off. You can also select one of six call melodies.
Settings are selectable for the intercom and each line.
Follow the menu instructions to select the volume and
melody you prefer, then press
OK
or
SAVE
to confirm.
Low battery tone
The handset is factory programmed to alert you with a
tone when the battery is low and needs recharging.
Press
ON
or
OFF
, then press
OK
to confirm.
Out-of-range tone
The handset is factory programmed to alert you with a
tone when the handset is too far from the base. Press
ON
or
OFF
, then press
OK
to confirm.
Keypad tone
The handset is factory programmed to beep at each
keypress. Press
ON
or
OFF
, then press
OK
to confirm.
Contrast
At this menu you can adjust screen contrast to one of 16
levels. Use the
<> buttons to select the level you prefer,
then press
OK
to confirm.
Enhanced mode
Use the
^V buttons to select On, Off or Auto, then
press
OK
to confirm. When on, this mode may improve
sound quality and range, but will use more battery
power. In Auto mode, the handset switches to Enhanced
Mode when reception is poor.
Rename
Select Rename to change the name (up to 14 letters) that
identifies your handset in all Intercom/Transfer menus
(see page 17 to enter letters). Press
SAVE
to confirm.
HANDSET 1
RDL MEM MENU
MAILBOXES
CALL HISTORY
HANDSET SETTINGS
REGISTER
^ V OK
LOW BATT TONE
RINGERS
RANGE TONE
KEYPAD TONE
^ V SET
RANGE TONE
LOW BATT TONE
KEYPAD TONE
CONTRAST
^ V SET
Select MENU
Select HANDSET SETTINGS
Scroll to choose desired item
Press SET to select
ATT-2562CIB-d4.qxd 12/29/2003 6:22 PM Page 14