MagTek IntelliStripe 340 - Manual (Page 15)

Section 2. Installation
9
The Power Supply, P/N 64300080, 100V
−240V regulated, 12VDC, with 2.5 mm plug is shown in
Figure 2-3. The AC power cord, P/N 71100001, is for use in North America. Other users must
supply their own AC cord, or contact MagTek for international cords.
3 Prong
Connector
12VDC Plug
GND
Auto Range
Power Supply
North American
100V–240V
Power Cord
Figure 2-3. Power Supply and AC Cable.
REAR PANEL
The Rear Panel is shown in Figure 2-4. The Cable, Tie Wraps, and Cable Clamps are installed in
the factory.
Tie Wrap Cable Clamps
Back View
Factory
Use Only
7-Pin
Connector
Pin 7
Slot For Ejector Rod
To Remove Cards
Tie Wrap
Pin 1
Figure 2-4. Rear Panel