MagTek INTELLISTRIPE 380 USB/RS-232 - Manual (Page 9)

1
SECTION 1. FEATURES AND SPECIFICATIONS
The IntelliStripe
®
380, Desktop Motorized Reader-Encoder reads and encodes magnetic-stripe
cards and smartcards.
CONFIGURATIONS
Part numbers and descriptions for the basic configuration are as follows:
16050408
IntelliStripe 380
16050410
IntelliStripe 380, Magstripe Only
16051417 I/O Cable, 10-pin RJ45 connector connects to host 9-pin connector with
12V/Ground connector for Power Supply.
16051422
USB Cable, 5-pin mini B plug, connects to host 4-pin USB Type A Plug with the
10-pin RJ45 and 12V/Ground connector for Power Supply.
64300091
Power Supply 12 VDC, 4 A output, 100 –240 VAC auto ranging input.
71100001
AC power cord, P/N is for use in North America. Other users must supply their
own cord, or contact MagTek for international cords.
FEATURES
The IntelliStripe 380 provides the following key features:
• 3-Track magstripe read and encode with support for HiCo and LoCo cards.
Also supports Drivers License and Custom format encode scheme.
• EMV T=0, T=1 Smartcard Interface. Also supports popular memory cards.
• RS-232 or USB primary host interface using MCP protocol.
• Auxiliary RS-232 interface to support an external interface.
• Small and attractive desktop enclosure with easy access to Optional SAM(s). Also
provides facilities for cable strain-relief and card-jam clearing.
• FLASH programmable
• Dual Color LED status indicator.
• Single cable with remote power pack. Power is routed through communications cable.
• Optional Tamper Switch