MagTek INTELLISTRIPE 380 USB/RS-232 - Manual (Page 10)

IntelliStripe 380 USB/RS-232
2
APPLICABLE DOCUMENTS
Standards
ISO 7811-2, -3, -4, -5
Identification cards tracks 1-3
ISO 7810 Physical specifications
ISO 7816 Smartcard specifications
EMV 1996 Europay-Mastercard-Visa 1996 Level I Specification
EMV 2000 Europay-Mastercard-Visa 2000 Level I Specification
MagTek Documents
MCP Serial Transport Protocol, P/N 99875163
IntelliStripe 380, Command Reference Manual, P/N 99875217
SOFTWARE ACCESSORIES
The following Software Modules may be required and will assist in the development of
application software. In addition, this software can provide an initial test platform for checkout
of the IntelliStripe 380.
•
IntelliStripe Picture Demo with MCP Driver:
P/N 30037472 (CD) or P/N 99510015 (Web Release)
This software will install both a Demo program and the MCP driver.
The Demo program is useful for initial checkout of the Reader’s functionality. The
MCP driver is recommended for use as the communications interface on Windows
based host systems. Application programmers can interface to the MCP driver via a
MagTek defined API.
•
Source Code for Picture Demo Program:
P/N 30037436
Visual Basic 6.0 source code for the Picture Demo program.
This will be useful to Application Programmers, as it shows examples of how to
interface with the MCP drivers and how to use the various commands.
COMPONENTS
The components are grouped in the following categories: The Motorized Card Transport,
Packaging/Enclosure, and Electronics and PCB, External Auto-ranging Power Pack, and
Firmware.
Motorized Card Transport
The Card Transport is based on an existing MagTek magstripe/encode module. This module
incorporates the following features: