MagTek IMAGESAFE99875500 - Manual (Page 76)

ImageSafe Windows API Specifications
68
SECTION = DeviceStatus
The DeviceStatus section includes keys that report general operational status of the device.
State
This key specifies the general status of the device.
Values Value Description
ONLINE Device is connected and online; device is ready to process check
ERROR Device is not ready to process check
Path
This key specifies status of the check path.
Values Value Description
OK Check path is clear
ERROR Check path is not clear
ScanCalibStatus
This key specifies the status of the most recent scanner calibration performed on the device. It is highly
recommended to keep the factory calibration. Any calibration performed by the user will take precedence
over the factory calibration. If the user calibration is invalid, the device uses factory calibration.
Values Value Description
NONE The device is not calibrated
FACTORY The device is using factory calibration
USER The device is using the user calibration
ERROR Neither the factory nor user calibration is valid
SnsrCalibStatus
This key specifies the status of the most recent sensor calibration performed on the device.
Values Value Description
NONE The sensor is not calibrated
FACTORY The sensor is using factory calibration data
ERROR The calibration data is invalid
ExpressEnabled
This key specifies if ImageSafe is set as “express mode”.
Values Value Description
TRUE The device is set as express mode
FALSE The device is set as normal mode*
* If the USB speed is USB1.1, the device is ALWAYS set as normal mode. This value is ALWAYS set as
“FALSE”.