MagTek IMAGESAFE99875500 - Manual (Page 75)

Section 7. Other Keys Available from Device
67
Image
This key indicates what check scanning capabilities are available on the device.
Values Value Description
BOTH The device scans the front and back images of the check
FRONT The device can only scan the front image of the check
BACK The device can only scan the back image of the check
NONE The device cannot scan any images
MICR
This key indicates whether the device is capable if reading MICR data.
Values Value Description
T True: device can read MICR data
F False: device can NOT read MICR data
UnitSerialNumber
This key specifies the serial number of the device.
Values Value Description
string Device serial number
Stamp
This key indicates whether the device has stamping capability.
Values Value Description
BOTH The device has stamping capability on the front and the back printers
FRONT The device has stamping capability on the front printer only
BACK The device stamping capability on the back printer only
NONE The device does not have stamping capability
MachineType
This key indicates the type of ImageSafe device connected.
Values Value Description
IMAGESAFE The device connected is ImageSafe
USBDriver
This key indicates the USB driver configuration for the ImageSafe device.
Values Value Description
MAGUSB ImageSafe is configured for MagTek USB drivers
RNDIS ImageSafe is configured for RNDIS USB drivers
ExpressCapable
This key specifies if ImageSafe can run “express mode”.
Values Value Description
TRUE The USB speed is USB2.0 - the device can run “express mode”
FALSE The USB speed is USB1.1 - the device can NOT run “express mode”