MagTek MagneSafe V5 - Manual (Page 137)

Appendix F. List of Properties
129
Properties Default
Dynamag Dynamo
LCD
BulleT
SPP
BulleT
KB
Flash iDynamo U-Finity Insert
UART
RS-232 HID KB
0x30 Send Current Encryption
Counter 0x00 (don’t send
Encryption Counter)
    
0x31 Mask Other Cards
0x00 (Don’t Mask
Other cards)
         
0x32 MSR Read Direction 2 (Withdrawal) 
0x33 Card Inserted None 
0x34 Send Clear AAMVA Card
Data Flag
0x00          
0x36 Enable MagneSafe 2.0
format
0x00 (Disabled)        
0x37 MagneSafe 2.0 Decode
Status 0x00 (no decodes
performed yet)
       
0x38 HID SureSwipe Flag 0x00  
0x39 MagneSafe 2.0 Track
Handling
0x00 (always create
MS 2.0 format if
Track 1 or Track 2
available)
       
0x3A Software ID 2
Shows part number
of reader firmware

0x3B MagneSafe 2.0 Enhanced
Features
0x00      
0x3C Display Width 
0x3D Transaction Validation
“Approved” text

0x3E Transaction Validation
“Time-Out” text

0x3F Transaction Validation
“Aborted “ text

0x40 Display Rotation Period 
0x41 Status Message Period 
0x42 Welcome Message 
0x43 Ready Message 