Actiontec electronic GT701-WG - Manual (Page 76)

72
Actiontec 54 Mbps Wireless DSL Gateway User Manual
73
Chapter 6 Advanced Setup
Port Forwarding
Selecting Port Forwarding in the “Advanced Configuration” screen generates the
“Port Forwarding” screen. Port forwarding allows certain programs to bypass the
Gateway’s built-in firewall, allowing access to parts of the network (for hosting a
Web or ftp server, for example). To use port forwarding, enter the IP port range in
the “
IP Port Range” text boxes. (If more than 10 ports are needed, Actiontec recom-
mends using DMZ Hosting. See “ DMZ Hosting,” below, for more information.)
Choose the protocol type from the “Protocol” list box, then enter the IP address of
the computer on the network to be used as a host. Click Add. The forwarded ports
appear in the “List of Forwarded Ports” text box.
To remove forwarded ports, highlight them, then click Remove.
Clicking Advanced brings up the “Advanced Port Forward” screen.