Lan ip address, Dhcp server, 68 dhcp server – Actiontec electronic GT701-WG User Manual
Page 71
68
Actiontec 54 Mbps Wireless DSL Gateway User Manual
69
Chapter 6 Advanced Setup
LAN IP Address
Selecting LAN IP Address in the “Advanced Configuration” screen generates the
“LAN IP Address” screen.
The values in the “LAN IP Address” and “Netmask” text boxes are the IP address
and Subnetmask of the Gateway as seen on the network. These values can be
modified for your LAN network, but Actiontec recommends keeping the default
factory settings (IP Address 192.168.0.1 Subnetmask 255.255.255.0).
☞
Note: If the Gateway’s
LAN IP
Address is modified, verify the
DHCP
Server range is within the same subnet. For more infor-
mation, see “
DHCP
Server Configuration.”
After changing settings, click Next or Back to continue, or Save and Restart to
make all changes permanent.
DHCP Server
Selecting
DHCP
Server in the “Advanced Configuration” screen generates
the “
DHCP
Server” screen. The Gateway has a built-in
DHCP
(Dynamic Host
Configuration Protocol) server that automatically assigns a different
IP
address to
each computer on the network, eliminating
IP
address conflicts.
The factory default setting is On. To disable the
DHCP
Server, select Off.