Actiontec electronic GT701-WG User Manual

Page 65

Actiontec 54 Mbps Wireless DSL Gateway User Manual

Chapter 6 Advanced Setup

Encapsulation

If the Gateway is configured to obtain an

address through

DHCP

or to specify a

static

address, select the appropriate encapsulation option used by the ISP (

RFC

1483

Bridged or

RFC

1483

Routed).

☞

Note: Contact the

ISP

if unsure of the proper configuration.

Unnumbered Mode/VIP Mode

If a block of public static

addresses was purchased from the

ISP

, select

Unnumbered Mode by clicking in the appropriate check box. Then, enter the IP
Address and Subnet Mask in the “Gateway Address” and “Unnumbered Subnet
Mask” text boxes below the “Unnumbered

Address.” Click Next, then click Save

and Restart to make all changes permanent.
The Unnumbered Mode feature automatically configures the appropriate

rout-

ing for the

Address block. The

route will bypass

NAT

, enabling the public

to be routed WAN

-to-

LAN

, as well as

LAN

-to-

WAN

☞

Note: The

Address information should be obtained from the

ISP

when purchasing a block of public static

address. Contact

the

ISP

if this information was not received.