Actiontec electronic GT701-WG - Manual (Page 66)

62
Actiontec 54 Mbps Wireless DSL Gateway User Manual
63
Chapter 6 Advanced Setup
VIP Mode - This feature is used in conjunction with Unnumbered Mode. When
VIP Mode is activated, the Gateway uses NAT for private IP Addressing for the Local
Area Network ( LAN ), allowing both Public IP Addressing and Private IP Addressing to
be configured to the LAN simultaneously, while the DHCP server is reserved for Private
IP Addressing. All computers using Public IP Addresses with Unnumbered Mode must
have the Public IP Addresses statically assigned.
After configuring your settings, click Next, then click Save and Restart to make all
changes permanent.
Wireless Settings
Selecting Wireless Settings in the “Advanced Configuration” screen generates the
“Wireless Settings” screen. To activate the wireless “radio” of the Gateway, click in
the circle next to “On.” To turn it off, click in the circle next to “Off.”
ESSID
ESSID is the network name assigned to the wireless network. The factory default
setting is “ ACTIONTEC .” Although Actiontec recommends keeping the default
value intact, the ESSID value can be modified, using any combination of alphanu-
meric characters (i.e., A-Z , a-z, 0-9 ). All wireless-capable computers included on
the Gateway’s wireless network must have this same ESSID value. (For the Actiontec
802.11 b Wireless PC Card, the ESSID value must be the same as the SSID value.)