Kenwood DPX504U - Manual (Page 5)

English | 5
Basic Operations
Power
Turns the power ON by pressing the
[SRC] button.
Press the [SRC] button for at least 1
second to turn the power OFF.
Source selection
Press the [SRC] button.
Tuner (“TUNER”) ➜ USB (“USB”) or iPod
(“iPod”) (DPX504U/ DPX404U only) ➜
CD (“CD”) ➜ Auxiliary Input (“AUX”) ➜
Standby (“STDBY”/ “STANDBY”) ➜ Tuner...
DPX504U DPX404U
Press the [iPod] button to switch the
source to iPod.
The source “USB”/ “iPod” and “CD” can
be selected when each source is ready
to play.
When an optional accessory is
connected, the source name for each
device appears. (DPX504U only)
Volume
Turn the [VOL] knob to adjust the sound
volume.
Attenuator
Press the [ATT] button.
Turning the volume down quickly.
USB terminal (DPX504U/ DPX404U
only)
USB device or iPod can be connected.
CA-U1EX or KCA-iP101/iP102 (optional
accessory) is recommended to connect a
USB device or iPod.
Auxiliary input
Portable audio device can be connected
with the stereo mini-plug (3.5 mm ø).
Display selection
Each time you press the [DISP] button,
another display mode will be selected.
Refer to (page
36)/ (page 40) of
Instruction manual
DPX504U
Log Function recall
Previously used functions are
automatically logged in memory and
displayed as the list.
1
Press the [LOG] button.
2
Turn the [VOL] knob and press it when
the desired Log Function is displayed.
To cancel Log Function recall, press
[ ].
Logs can be saved or deleted. Refer to
(page 58) of Instruction
manual.
DPX404U DPX304
Bass boost
Each time you press the [B.Boost]
button, the bass tone will be boosted in
two steps (LV1, LV2, OFF).
[DISP]
[ATT]
[SRC] [iPod]
[B.BOOST]
[VOL]
[ ]
DPX404U
DPX404U
DPX304
[LOG]
DPX504U
DPX504U
Auxiliary input
USB terminal
DPX404U DPX504U
B59-2055-00_00_2DIN_E_QSG.indb 5 11/01/19 15:00