Kenwood PAD-iP7 - Manual (Page 3)

PAD-iP7 4 English 5
Contents
Caution : Read the pages marked ¤ carefully to
ensure safe operation.
Accessories
Dock adapters (5 types)
Used to connect an iPod. (Page 7)
D.AUDIO connection cable
(4-pole miniplug − 4-pole miniplug)
Video connection cable
(4-pole miniplug − RCA video/audio plug)
AC adapter
( Europe : AC-050140A)
( Australia : AS070-050-DM)
Before use
iPod are trademarks of Apple Inc., registered in the U.S. and
other countries.
Y Cb Cr
AUDIO/
VIDEO
DC IN
COMPONENT VIDEO
D.AUDIO
„
† ‡ ˆ ‰
Š
¡ iPod dock
Mount your iPod on this unit by means of one of the
supplied dock adapters or the dock adapter supplied
with your iPod.
™ Power indicator
The indicator lights blue when the unit is on.
£ DC IN terminal (5V DC)
Connect the supplied AC adapter to this terminal.
The model name label at the bottom of this unit
indicates the power-related information including the
supply voltage and polarity. Be sure to check them
before connecting the AC adapter.
¢ COMPONENT VIDEO output connectors
(Y/Cb/Cr)
To monitor the video from the iPod, connect a TV or
AV amplifi er equipped with component video input
connectors to these connectors.
∞ AUDIO/VIDEO (COMPOSITE) output connector
Connect the Audio/Video input connectors of an AV
amplifi er or TV to this terminal.
§ D.AUDIO control terminal (D.AUDIO)
Connect an audio component compatible with the
input to a Kenwood digital audio player.
¶ Video selector switch
Select the video signal output between the
COMPONENT VIDEO output connectors [
¢] and the
AUDIO/VIDEO (COMPOSITE) output connector [ ∞].
Top view Back view
Bottom view
Model name label
Component names and functions
Operating precautions
Installation
Observe the following precautions when installing the
equipment.
• If this product is used near a radio, TV or cellular phone, it may
become a source of reception interference. Please use this
product at a certain distance from them.
• If heat radiation is insufficient, buildup of heat inside the
product may cause malfunction or a fire hazard. Do not cover
the product with a cloth or place an obstacle to heat radiation
at the top of the product.
Maintenance
When this product gets dirty, wipe it with a soft, dry cloth.
Do not use lacquer thinner, benzene or alcohol as these
substances may discolor the finish.
Contact revitalizer
Do not use a contact revitalizer as it may become a cause of
malfunction.
Particularly, a contact revitalize containing oil may deform plastic
parts of the product.
Before applying power ...................................2
Safety precautions ......................................................................2
IMPORTANT SAFETY INSTRUCTIONS ............2
Before use .......................................................4
Operating precautions .............................................................4
Accessories ......................................................................................4
Component names and functions .................5
Connections ....................................................6
Mounting the iPod .........................................7
Controlling the iPod ......................................8
In case of diffi culty ..........................................9
Specifi cations ..................................................9
• The apparatus and AC/DC adaptor shall not be
exposed to dripping or splashing and that no
objects filled with liquids, such as vases, shall be
placed on apparatus and AC/DC adaptor.
• To be completely disconnect the power input,
the AC/DC adapter shall be disconnected from
the mains, as the disconnect devices in the
AC/DC adaptor.
• The AC/DC adapter should not be obstructed OR
should be easily accessed during intended use.
• The marking information is located at the bottom
of apparatus.
CAUTION
Notes on AC adapter
B60-5793-08-00_English.indd 4-5 08.8.27 1:09:19 PM