Anritsu MG3641A - Manual (Page 134)

SECTION 6 GPIB
6-28
6.7 Detailed Description of Commands
6.7.1 Frequency subsystem
:FREQuency[ :CW] or
Function Sets the carrier frequency.
Parameter = 0 Hz to 1040 MHz (MG3641A)
0 Hz to 2080 MHz (MG3642A)
= UP
DOWN
Unit
(UP,DOWN:)
Restriction None
:FREQuency[ :CW]?
Function Reads out the carrier frequency.
Response Carrier frequency
Restriction None
:FREQuency[ :CW]:STEP[ :INCRement]
Function Sets the frequency step value.
Parameter = 0 Hz to 1040 MHz (MG3641A)
0 Hz to 2080 MHz (MG3642A)
Unit
Restriction None
:FREQuency[ :CW]:STEP[ :INCRement]?
Function Reads out the frequency step value.
Response Frequency step value
Restriction None
:FREQuency:RELative
Function Turns ON or OFF the relative frequency display mode.
Parameter = ON or 1
OFF or 0
Unit
Restriction None
:FREQuency:RELative?
Function Reads out the state of relative frequency display mode.
Response Relative frequency display mode = OFF
ON
Restriction None
:FREQuency:OFFSet
Function Sets the frequency offset value.
Parameter = –7 GHz to 7 GHz
Unit
Restriction None