Anritsu MG3641A - Manual (Page 158)

SECTION 6 GPIB
6-52
*STB? Read Status Byte Query
Function Reads out the current value of the status byte including the MSS bit.
Response Register = 0 to 255
*PSC Power On Status Clear Command
Function Determines whether the service request, enable register, standard event status, and parallel
poll enable register are cleared or not at power-on.
Parameter = 0 : Not cleared
1 : Cleared
*PSC? Power On Status Clear Query
Function Queries whether the power-on-status-clear flag is TRUE or FALSE.
Response Power-on-status-clear flag = 0 : FALSE
1 : TRUE
*SAV Save Command
Function Saves to the memories.
Parameter = 0 to 999
*This command is the same as “:MEMory:STORe”.
*RCL Recall Command
Function Recalls from memories.
Parameter = 0 to 999
*This command is the same as “:MEMory:RECall”.
*RST Reset Command
Function Resets the device in the third level.
Parameter None