Usb) terminal, Sd card slot, Ipod/iphone applied part – Kenwood AS-iP70 User Manual
Page 9
9
English
USB terminal
SD card slot
Left speaker
(USB) terminal
Connect a USB fl ash memory or a USB Mass Storage-
compatible digital audio player.
Digital audio player, etc.
USB fl ash memory
To disconnect the USB device…
■
Pull out the USB device after stopping the play.
Recognition may take time with certain devices.
•
The USB connection mode selection menu may be displayed
•
with certain devices. In this case, select “Storage mode.”
This unit cannot recognize a USB device through a USB hub, etc.
•
SD card slot
Insert an SD card containing music or photos into the SD card
slot so that the label side of the card faces downward.
To disconnect the SD card…
■
Pull out the SD card after stopping the play.
iPod/iPhone applied part
Right speaker
iPod/iPhone applied part
The iPod/iPhone applied part can be ejected by pushing the
case on the right side panel. Attach the dock adapter, which
is provided with iPod/iPhone or commercially available, and
then install iPod/iPhone on the dock adapter.
Dock adapter
To disconnect the dock adapter…
■
Insert the blade of a fl at-blade screwdriver into the slit
on the dock adapter and lift it.
If iPod/iPhone is connected directly to this unit without using
•
the dock adapter, the connector may be damaged. Be always
sure to use the dock adapter.
iPod/iPhone cannot be connected together with accessories
•
such as the cover or case. Be sure to remove the accessories
before connecting.
Insert or remove the iPod gently into/from the dock adapter.
•
Update the software of your iPod/iPhone to the latest version
•
before use.
It is required to set the external video output setting of
•
iPod/iPhone for use with this unit. When iPod/iPhone is
disconnected from this unit, be sure to set iPod/iPhone to the
original setting before playing video on it.
Left side panel
Right side panel
B60-5824-08.indb 9
10.6.8 9:47:19 AM