Kenwood TH-K2E - Discontinued User Manual

Page 78

ALL

CAN

You can alternate between monitoring the Call Channel
and the current operating frequency.

1 Select the frequency (in VFO or Memory Recall

Mode) you want to monitor.

•

In VFO Mode, turn the Tuning control to select the
desired frequency.

•

In Memory Recall Mode, turn the Tuning control to
select the memory channel you want to monitor.

2 Press [CALL] (1 s) to start the Call Scan.

3 The Call Channel and the selected VFO frequency or

memory channel are monitored.

4 To stop Call Scan, press [PTT] or [CALL].

Note:

◆

You must configure the CALL key function to “CALL” (Menu No.
18) prior to using Call Scan. Otherwise, a 1750 Hz tone will be
transmitted.

◆

The transceiver stops scanning when it detects a signal.

◆

You can perform Call Scan even if the recalled memory channel
has been locked out {page 67}.