Kenwood TH-K2E - Discontinued User Manual
Page 54
40
3 Press [MENU] (1 s).
•
When the transceiver receives a signal, scan starts.
The decimal point blinks during scan.
•
While the transceiver is receiving a signal during Tone
Freq. ID Scan, the signal is emitted from the speaker.
•
To reverse the scan direction, turn the Tuning control.
•
To quit the function, press [PTT].
•
When the tone frequency is identified, a beep sounds
and the identified frequency blinks.
4 Press [MENU] to program the identified frequency in
place of the current tone frequency.
•
Press any key other than [MENU], [LAMP], and
[MONI/SQL] if you do not want to program the
identified frequency.
•
Turn the Tuning control while the identified frequency
is blinking to resume scanning.
Note: Some repeaters do not re-transmit the access tone in the
downlink signal. In this case, check the other station’s uplink signal
to detect the repeater access tone.
- TS-2000 (150 pages)
- CK 680 (36 pages)
- HES20 (8 pages)
- CK 740 (48 pages)
- CK 300 (48 pages)
- CK 280 (32 pages)
- KTC-HR100 (32 pages)
- SPECTRUM 870AV (4 pages)
- TK-5710/5810 (41 pages)
- TK-5710/5810 (44 pages)
- KDC-X998 (48 pages)
- KDC-X998 (100 pages)
- PKT-23K (2 pages)
- TK-2180/3180 (53 pages)
- TK-2180/3180 (2 pages)
- TK-5220/5320 (44 pages)
- TK-5410D (2 pages)
- KDC-X598 (74 pages)
- DNX891HD (145 pages)
- DNX891HD (38 pages)
- DNX891HD (56 pages)
- TK-7180H/8180H (33 pages)
- TK-7180H/8180H (2 pages)
- NX-200G/300G (59 pages)
- NX-200G/300G (2 pages)
- TK-2360/3360 (2 pages)
- TK-2360/3360 (26 pages)
- DNX891HD (37 pages)
- NX-700/800 (37 pages)
- TK-7150/8150 (2 pages)
- TK-7150/8150 (23 pages)
- DDX8901HD (76 pages)
- TK-3230XLS (66 pages)
- NX-920G (72 pages)
- TK-2170/3170 (51 pages)
- NXR-710/810 (2 pages)
- TK-7360HV/8360HU (2 pages)
- TM-D710GE (55 pages)
- TM-D710GE (77 pages)
- NX-210G (48 pages)
- TK-480/481 (37 pages)
- TK-2312/3312 (2 pages)
- DNN991HD (1 page)
- DNN991HD (36 pages)
- DNN991HD (68 pages)