Kenwood KCA-BT300 User Manual

Page 31

English

FCC Notice

This device complies with part 15 of the FCC rules.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference,
and (2) this device must accept any interference
received, including interference that may cause
undesired operation.

Information on Disposal of Old Electrical
and Electronic Equipment and Batteries
(applicable for EU countries that have
adopted separate waste collection systems)

Products and batteries with the symbol

(crossed-out wheeled bin) cannot be
disposed as household waste.
Old electrical and electronic equipment
and batteries should be recycled at a facility
capable of handling these items and their
waste byproducts.
Contact your local authority for details in
locating a recycle facility nearest to you.
Proper recycling and waste disposal will
help conserve resources whilst preventing
detrimental effects on our health and the
environment.
Notice: The sign "Pb" below the symbol for

batteries indicates that this battery
contains lead.

FCC WARNING

This equipment may generate or use radio frequency energy.
Changes or modifications to this equipment may cause
harmful interference unless the modifications are expressly
approved in the instruction manual. The user could lose
the authority to operate this equipment if an unauthorized
change or modification is made.

NOTE

This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment may cause harmful
interference to radio communications, if it is not installed and
used in accordance with the instructions. However, there is
no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and

receiver.

• Connect the equipment into an outlet on a circuit different

from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician

for help.

IC (Industry Canada) Notice

Operation is subject to the following two conditions:
(1) This device may not cause interference, and
(2) this device must accept any interference, including

interference that may cause undesired operation
of the device.

The term "IC: " before the certification/registration
number only signifies that the Industry Canada
technical specification were met.

• Contains Transmitter Module FCC ID : RKXCK5050NEW
• Contains Transmitter Module IC ID : 5119A-CK5050NEW

your cell-phone to return to the hands-free talk mode.

• Switching between Display Modes

• Depending on the type of your control unit, the

following restrictions are placed.
- Up to 19 characters can be displayed.
- The # letter cannot be displayed, or "

|" (all segments

are lit) is displayed for #.

- You cannot switch between display modes.

B64-4713-00_10_KCA-BT300_KE.indb 31

10/03/12 14:51