Kenwood KCA-BT300 - Manual (Page 13)

English | 13
Receiving a call
Answering a Phone Call
Model-D-1: Press the Control knob or one of [1] – [6]
buttons
Model-D-2: Press the [VOL] button or one of [1] – [6]
buttons
☞ Inserting a disc such as a CD will disconnect your call.
Rejecting an Incoming Call
Press the [SRC] button.
Call waiting
Answering Another Incoming Call with the
Current Call Suspended
1. Model D-1: Press the Control knob.
Model D-2: Press the [VOL] knob.
2. Push the Control knob towards up or down. Select
the "ANSWER" display.
3. Model D-1: Press the Control knob.
Model D-2: Press the [VOL] knob.
Answering another Incoming Call after
Terminating the Current Call
Press the [SRC] button.
Continuing the Current Call
1. Model D-1: Press the Control knob.
Model D-2: Press the [VOL] knob.
2. Push the Control knob towards up or down. Select
the "REJECT" display.
3. Model D-1: Press the Control knob.
Model D-2: Press the [VOL] knob.
Answering the Waiting Call after Terminating the
Current Call
Press the [AUTO]/ [TI] button for at least 1 second.
Switching between the Current Call and Waiting
Call
Model D-1: Press the Control knob.
Model D-2: Press the [VOL] knob.
During a call
Disconnecting a Call
Press the [SRC] button.
Switching to the Private Mode ( )
Press the [
38] button.
Switches between Private talk ("PV TALK") or Hands-
free talk ("HF TALK") when pressed.
Adjusting the Voice Volume during a Call
Model D-1: Turn the Control knob.
Model D-2: Turn the [VOL] knob.
Other functions
Clearing the Disconnection Message
Press the [AUTO]/ [TI] button for at least 1 second.
Switching between Display Modes
Press the [AUTO]/ [TI] button. You can switch
between the Phone Book and the Call List.
Registering to the Preset Dial Number List
1. Enter the phone number you wish to register
Enter the phone number with reference to the
following:
Dial a number/ Calling a number in the call log/
Calling a number in the Phone Book
2. Select the button you wish to register
Press the [1] – [6] button for at least 2 seconds.
3. Exit the dialing method selection mode
Press the [MENU] button.
Items Set in Menu mode
* To enter the Menu mode, press the Control knob for
at least 1 second.
Display Setting overview
"DVC REGIST"*/
"DVC REG"* Register a Bluetooth device (pairing). See page 20.
"S-DVC SELECT"*/
"SDVC SEL"* Allow registration of a special device that cannot be
registered normally. See page 21.
"PHONE SEL"*/
"PHN-SEL"* Select a cell-phone subject to hands-free connection.
See page 22.
"DIALING MODE"*/
"D.MODE"* Select a dialing method. See page 12.
"AUDIO SEL"*/
"AUD-SEL"* Select the audio player to be connected. See page 22.
"SMS DOWNLOAD"*/
"SMS DL"* Download a short message. See page 24.
"SMS INBOX"*/
"INBOX"* Display the received short message. See page 24.
"VOICE TAG"*/
"VOICETAG"* Register the voice tag for "voice recognize". See page 22.
"VOICE RECOG"*/
"V-RECOG"* Make a voice dialing call. See page 12.
"DEVICE DEL"*/
"DVC-DEL"* Cancel registration of the Bluetooth device. See page 22.
"DVC-STATUS"/
"D-STATUS" "HF-CONNECT"/ "AD-CONNECT"/ "BAT"/ "SGNL":
Display the status of the Bluetooth device. See page 30.
"PIN EDIT"* Specify the PIN code required when registering this unit
using the Bluetooth device. See page 21.
"AUTO ANS"/
"ANS" "OFF"/ "0" – "99": Answer a call automatically after
lapse of the preset time interval for automatic answer.
See page 30.
"SP SEL"/
"SPK" "FRT"/ "F-R"/ "F-L": Specify the voice output speaker.
See page 30.
"CALL BEEP"/ "C-BP" "ON"/ "OFF": Output a beep from the speaker when a
call comes in. See page 30.
B64-4713-00_10_KCA-BT300_KE.indb 13 B64-4713-00_10_KCA-BT300_KE.indb 13 10/03/12 14:51 10/03/12 14:51