Clearing the events log, 0 clearing the events log – APC BC300 Series User Manual

Page 32

Installation Guide APC BC300 Series 40kW 208/450/480V UPS

990-1401

Clearing the Events Log

5.0 Clearing the Events Log

The events log contains the 250 most recent UPS events, including alarms. To clear the events
log, follow the steps below:

1. Press

and

at the same time. The display should show “Key in password”.

2. Using the key pad, enter “920701”. The display should show “Logging stack is reset”. The

events log is now cleared.

3. Press

. The display should show “Normal operation load power xx%”.

If the unit will not be in operation immediately, go to the “Start-up and Shutdown Procedure”
section.