Kenwood KMM-BT34 - Manual (Page 6)

4
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
Default: XX
AUDIO CONTROL
SWITCH PREOUT REAR/ SUB-W: Selects whether rear speakers or a subwoofer are connected to the line out
terminals on the rear (through an external amplifier).
SP SELECT OFF/ 5/4/ 6 × 9/6/ OEM: Selects according to the speaker size (5 inches or 4 inches,
6×9 inches or 6 inches) or OEM speakers for optimum performance.
DISPLAY
EASY MENU (For KMM-302BT )
ON: Both display and button illumination change to white color when entering [FUNCTION]. ;
OFF: Both display and button illumination remain as [COLOR SELECT] color. ( 12)
TUNER SETTING
PRESET TYPE NORMAL: Memorizes one station for each preset button in each band (FM1/ FM2/ FM3/ MW/
LW). ; MIX: Memorizes one station for each preset button, regardless of the selected band.
SYSTEM
KEY BEEP ON: Activates the keypress tone. ; OFF: Deactivates.
SOURCE SELECT
BUILT-IN AUX ON: Enables AUX in source selection. ; OFF: Disables. ( 8)
RUSSIAN SET Selects the display language for [FUNCTION] menu and Tag information (folder name, file
name, song title, artist name, album name) if applicable.
RUSSIAN OFF: Display language is English. ; РУССКИЙ BКЛ: Display language is Russian.
P-OFF WAIT Applicable only when the demonstration mode is turned off.
Sets the duration when the unit will automatically turns off (while in standby mode) to save
the battery.
20M: 20 minutes ; 40M: 40 minutes ; 60M: 60 minutes ; OFF – – –: Cancels
F/W UPDATE
UPDATE SYSTEM/ UPDATE BT
F/W UP xx.xx YES: Starts upgrading the firmware. ; NO: Cancels (upgrading is not activated).
For details on how to update the firmware, see: www.kenwood.com/cs/ce/
Set the clock
1 Press the volume knob to enter [FUNCTION].
2 Turn the volume knob to select [CLOCK], then press
the knob.
3 Turn the volume knob to select [CLOCK ADJUST],
then press the knob.
4 Turn the volume knob to make the settings, then
press the knob.
Day Hour Minute
5 Turn the volume knob to select [CLOCK FORMAT],
then press the knob.
6 Turn the volume knob to select [12H] or [24H], then
press the knob.
7 Press and hold to exit.
To return to the previous setting item or hierarchy,
press
.
While in clock display screen...
Press and hold DISP SCRL to enter clock
adjustment mode directly.
Then, perform step 4 to set the clock.
Set the initial settings
1 Press B SRC to enter STANDBY.
2 Press the volume knob to enter [FUNCTION].
3 Turn the volume knob to make a selection (see the
following table), then press the knob.
4 Press and hold to exit.
To return to the previous setting item or hierarchy,
press
.
2
3
GETTING STARTED
JS_KWD_KMM_BT34_EN_01_EN.indd 4 JS_KWD_KMM_BT34_EN_01_EN.indd 4 8/11/2013 4:09:40 PM 8/11/2013 4:09:40 PM