Kenwood KMM-BT34 - Manual (Page 11)

9 ENGLISH |
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
To Do this
Reject an incoming call Press B SRC.
End a call Press or B SRC.
Switch between hands-
free and private talk
modes Press 6 IW during a call.
• Operations may vary according to the
connected Bluetooth device.
Adjust the phone
volume Turn the volume knob during a call.
Phone
volume: [00] to [35] (Default: [15])
• This adjustment will not affect the volume
of the other sources.
Switch between two
connected phones Press repeatedly.
• Not applicable during a call.
Improve the sound quality during a call
While talking on the phone...
1 Press the volume knob to enter [FUNCTION].
2 Turn the volume knob to make a selection (see the following table),
then press the knob.
3 Press and hold to exit.
To return to the previous setting item or hierarchy, press .
Default: XX
MIC GAIN –20 — +8 (0): The sensitivity of the microphone increases as the
number increased.
NR LEVEL –5 — –20 (–10): Adjust the noise reduction level until the least noise is
being heard during a phone conversation.
ECHO CANCEL 1 — 10 (4): Adjust the echo cancellation delay time until the least echo
is being heard during a phone conversation.
• Pairing request (via Bluetooth) is automatically activated if an iPhone/
iPod touch is connected through the USB input terminal. (Applicable
only if [AUTO PAIRING] is set to [ON].) ( 12)
Press the volume knob to pair once you have confirm the device name.
Bluetooth test mode
You can check the connectivity of the supported profile between the
Bluetooth device and the unit.
• Make sure there is no Bluetooth device connected.
1 Press and hold
.
“PLEASE PAIR YOUR PHONE” appears.
2 Search and select this unit model name (KMM-BT3*/ KMM-3**BT/
KMR-M3**BTE) on the Bluetooth device.
3 Operate the Bluetooth device to confirm pairing.
“TESTING” flashes on the display.
The connectivity result (OK or NG) appears after the test.
PAIRING: Pairing
status
HF CNT: Hands-Free Profile (HFP) compatibility
AUD CNT: Advanced Audio Distribution Profile (A2DP) compatibility
PB DL:
Phonebook Access profile (PBAP) compatibility
• To cancel check mode, press and hold B SRC to turn off the unit.
Bluetooth mobile phone
To Do this
Receive a call Press or the volume knob or one of the
number buttons (1 to 6).
• All the button illumination flash when there is an
incoming call.
• When [AUTO ANSWER] is set to the selected time,
the unit answers incoming call automatically.
( 10)
BLUETOOTH®
JS_KWD_KMM_BT34_EWE0_01_EN.indd 9 JS_KWD_KMM_BT34_EWE0_01_EN.indd 9 8/11/2013 12:11:53 PM 8/11/2013 12:11:53 PM