Kenwood TK-2360E - Manual (Page 25)

7
vOICE OPErATED TrANSMISSION (vOX)
VOX operation allows you to transmit hands-free. This feature
can be activated or deactivated by your dealer .
vOX GAIN lEvEl
1 connect a headset to the transceiver .
2 With the transceiver power off, press and hold the Side 1
key for 2 seconds while turning the transceiver power ON.
• The LED flashes red and green.
3 press the Side 1 key to increase the Vox gain level, and
the Side 2 key to decrease the level .
• the Vox gain can be adjusted from levels to 0 and off .
4 While adjusting the level, speak into the headset
microphone to test the sensitivity level . (your voice is not
trasmitted during this test procedure .)
• When sound is recognized, the led lights orange .
5 press the PTT switch to save the setting.
vOX OPErATION
1 connect a headset to the transceiver .
2 to transmit, simply speak into the microphone .
• the transceiver recognizes sound levels depending on the
VOX Gain level. If it is too sensitive, it will transmit when there
is noise in the background. If it is not sensitive enough, it will
not pick up your voice when you begin speaking.
3 When you finish speaking, transmission ends.