Kenwood TK-2360E - Manual (Page 19)

n
Priority Channel Select
press this key to set the currently selected channel as
the Priority channel. During Scan, the transceiver will
automatically change to the Priority channel when a call is
received on that channel, even if a call is being received on
a normal channel .
n
Scan
press this key to toggle scan on and oFF . While
scanning, the transceiver checks for a signal on each
channel and only stops if a signal is present .
n
Scan Temporary Delete
When scan pauses at an undesired channel, you can
temporarily remove that channel from the scanning
sequence by pressing this key .
n
Scrambler
press this key to toggle the scrambler function on and
OFF. The Scrambler allows you to hold conversations in
complete privacy by encrypting your transmitted signals .
n
Squelch Off
press this key to hear background noise . press this key
again to return to normal operation .
n
Squelch Off Momentary
press and hold this key to hear background noise . press
this key again to return to normal operation .
n
Status 1/ Status 2
press the Status 1 or Status 2 key to transmit the status
message assigned to them .
Note: This key does not work on transceivers set up for 5-tone
signaling .