Kenwood TK-2360E - Manual (Page 18)

0
n
Key lock
press this key to lock and unlock the transceiver keys .
While key lock is activated, you cannot use the Auxiliary,
Side 1 , Side 2, and microphone pF keys .
Note: You can still use the following key functions when Key
lock is activated: emergency, lone Worker, monitor, monitor
momentary, squelch off, squelch off momentary, key lock,
ptt + autodial .
n
lone Worker
press this key to toggle the lone Worker function on or
oFF . if the transceiver is not operated for the
pre-programmed time, it will emit a Lone Worker tone.
Subsequently, if no operation is performed while the tone is
emitted, the transceiver will enter Emergency mode.
n
low Transmit Power
Press this key to change the transmit power on the current
channel to low power, to conserve battery energy.
n Monitor
press this key to deactivate qt or dqt signaling . press
this key again to return to normal operation .
n Monitor Momentary
press and hold this key to deactivate qt or dqt signaling .
release the key to return to normal operation .
n
Paging
after selecting your desired Fleetsync channel, press this
key to transmit your ptt list id, to request a call .