Kenwood TK-2360E - Manual (Page 24)

6
5-TONE SIGNAlING
5-tone signaling is enabled or disabled by your dealer . this
function opens the squelch only when the transceiver receives
the 5 tones programmed in your transceiver . transceivers that
do not transmit the correct tones will not be heard.
Note: your transceiver functions include either 5-tone signaling or
Fleetsync {page 4}, but not both .
MAKING A SElCAll (SElECTIvE CAllING)
a selcall is a voice call to a particular station or to a group of
stations .
1
select your desired zone and channel .
2 press the Call 1 or Call 2 key to transmit the 5-tone codes
assigned to them .
2 When you hear a response, continue the conversation by
pressing the PTT switch and speaking into the microphone.
rECEIvING A SElCAll
If enabled by your dealer, an alert tone will sound and the LED
will blink when a Selcall has been received.
to respond to the call, press the PTT switch and speak into the
microphone .
• to mute the speaker after squelch opens, press the key
programmed as monitor .
• your dealer can program the monitor function to close again after a
specific time period elapses.
• if transpond for 5-tone signaling is programmed, an
acknowledgement signal is returned to the calling station.
• If Call Alert for 5-tone Signaling is programmed, an alert tone will
sound when the correct tones are received.