Kenwood TK-7360E - Manual (Page 5)

CONTENTS
GeTTING STARTeD ................................................................................................1
GeTTING ACQUAINTeD .........................................................................................3
PROGRAmmAble FUNCTIONS .............................................................................5
bASIC OPeRATIONS ...............................................................................................6
SCAN ........................................................................................................................7
DTmF CAllS ...........................................................................................................8
SIGNAlING ............................................................................................................10
5-TONe SIGNAlING ..............................................................................................10
FleetSync: AlPhANUmeRIC 2-WAY PAGING FUNCTION ................................... 11
ADvANCeD OPeRATIONS ....................................................................................13
bACkGROUND OPeRATIONS ..............................................................................16
vGS-1 OPTIONAl vOICe GUIDe & STORAGe UNIT ..........................................17
P
recauTions
Observe the following precautions to prevent fire, personal injury, and transceiver
damage.
• Do not attempt to configure the transceiver while driving; it is too dangerous.
• Do not dsassemble or modfy the transcever for any reason.
• Do not expose the transcever to long perods of drect sunlght, nor place t near heatng
applances.
• If an abnormal odor or smoke s detected comng from the transcever, swtch the
transcever power off mmedately, and contact your Kenwood dealer.
• Use of the transceiver while you are driving may be against traffic laws. Please check
and observe the vehcle regulatons n your area.
• Do not use options not specified by Kenwood.
◆
The transcever operates n 12 v negatve ground systems only! Check the battery polarty and
voltage of the vehcle before nstallng the transcever.
◆ Use only the suppled DC power cable or a Kenwood optonal DC power cable.
◆ Do not cut and/or remove the fuse holder on the DC power cable.
For passenger safety, nstall the transcever securely usng the suppled mountng bracket and
screw set so the transcever wll not break loose n the event of a collson.