Kenwood C-313 - Manual (Page 6)

Standby mode
While the STANDBY/TIMER indicator is lit, a small
amount of power is supplied to the system to back up
the memory. This is called standby mode. Under the
condition, the system can be turned ON by the remote
control unit.
RADIO
Auto preset radio station
Radio stations can be preset automatically in preset channels.
1
Press TUNER BAND button to select the
desired waveband: FM or AM.
2
Press MEMORY/REPEAT button for more
than 2 seconds.
The receivable radio stations are preset
automatically. When the Auto preset operation has
completed, the unit enters the condition in which
preset station P01 is tuned.
Tuning to a preset radio station
Press FOLDER/P.CALL A or B button.
D.AUDIO
Playback of Digital Audio Player
Kenwood digital audio player can be connected to play audio
fi les in it.
Optional cable
Kenwood digital
audio player
1
Connect an the player.
2
Turn the connected player ON and start
playing it.
iPod C-515BT only
Connect a iPod to the iPod dock.
Bluetooth audio C-515BT only
Press PAIRING button.
You can listen to audio fi les stored in Bluetooth audio player. For
more information, refer to the supplied Instruction manuals.
3
Start playback.
Press E button.
To stop playback of CD/USB device/
SD card/D.AUDIO...
Press STOP
F button.
To select a track/ fi le/ song...
Press
4 or ¢ button.
4
Adjust using VOLUME.
A Increasing the volume level
B Decreasing the volume level
VOLUME
VOLUME
Muting the sound temporarily...
Press MUTE button.
To cancel muting...
Press MUTE button again (this resumes
the original volume) or adjust the volume.
Removing a disc
1
Press 0 button and carefully pull it out.
2
Press 0 button to close the CD door.
Removing the USB device/SD card/D.AUDIO/
iPod
1
Press the button to select standby
mode.
2
Remove the USB device/SD card/D.AUDIO/
iPod.
B60-5809-08_Quick Start.indd 6 09.6.12 0:45:29 PM