Kenwood C-707i-W - Manual (Page 17)

English 17
Connecting the System
SUB WOOFER PRE OUT
Connect a subwoofer (such as the optional SW-40HT) to
the [SUB WOOFER PRE OUT] terminal on the rear panel
of the main unit.
Powered Subwoofer
PHONES
Plug headphones equipped with a 3.5 mm stereo mini-
plug into the [
PHONES] jack on the front panel of the
main unit.
AUX IN
VCR, etc.
Audio OUT
Connect the audio OUT terminals on components such
as VCRs to the [AUX IN] terminal on the rear panel of the
main unit.
iPod
Connect an iPod to the [iPod] terminal on the front panel
of the main unit.
To connect an iPod, you will need a PNC-iP120 iPod
connection cable (optional accessory).
When you are not using the iPod, unplug the iPod
connection cable from the main unit.
For information about supported iPod models, see page
27.
REC OUT
Connect a Kenwood digital audio player with direct
encode feature to the [REC OUT] terminal on the rear
panel of the main unit.
[REC OUT] outputs an analog audio signal.
en02_c-707i.indd 17 en02_c-707i.indd 17 12/27/2007 3:14:38 PM 12/27/2007 3:14:38 PM