Kenwood C-707i-W - Manual (Page 13)

13 English
Connecting the System
The antenna supplied with the system is a basic antenna for indoor use. For stable signal reception, the use of an outdoor
antenna (commercially available) is recommended. Disconnect the indoor antenna fi rst before connecting an outdoor
antenna.
Connecting the FM indoor antenna
The antenna supplied with the system is for indoor use. Place it as far away as possible from the system, your TV set, the
speaker cords, AC adapter and the power cord, and point it in the direction that provides the best reception.
Connecting the AM loop antenna
1 2 3 Connecting the antenna cord
Connect the AM antenna cord to the [AM] and
[
MGND] terminals, as shown on the right.
Microcomputer malfunctions
If the system does not operate normally or shows display errors, reset the
microcomputer. (Page 81)
AC adapter cautions
Do not cover or wrap the AC adapter with cloth, blanket or other material.
Doing so will result in fi re due to excessive heat accumulating in the adapter.
Use only the AC-120400A that comes with this product.
To ensure optimum operation of the system, locate the AC adapter as far away as possible from the system.
AC power cord
To AC wall outlet
Connecting the AC adapter
en02_c-707i.indd 13 en02_c-707i.indd 13 12/27/2007 3:14:37 PM 12/27/2007 3:14:37 PM