Setting the temperature, Freezer compartment, Energy saving mode – Siemens GS36NBI30 User Manual
Page 27: Alarm function, Door alarm, Temperature alarm, When the appliance is switched on, If the freezer compartment door is open too long, Switching off the alarm
en
27
Setting the
temperature
Fig.
2
Freezer compartment
The temperature can be set from -16 °C
to -26 °C.
Keep pressing temperature setting
button 5 until the required freezer
compartment temperature is set.
The value last selected is saved. The set
temperature is indicated on display 1.
We recommend a factory setting of -
18 °C in the freezer compartment.
Energy saving mode
When the appliance is not used,
the display on the controls switches
to energy saving mode.
Energy saving mode display, Fig.
2/6
illuminates.
As soon as the appliance is used, e.g.
the door is opened, the display switches
back to normal illumination.
Alarm function
In the following cases an alarm may be
actuated.
Door alarm
The door alarm (continuous sound)
switches on and the “alarm” display
2/4
is lit, if the appliance door is open for
longer than one minute. Close the door
to switch off the door alarm.
Temperature alarm
The temperature alarm switches on
if the freezer compartment is too warm
and the frozen food is at risk of thawing.
The alarm display 4 is lit.
When the alarm button 4 is pressed,
the temperature display 1 indicates for
five seconds the warmest temperature
reached in the freezer compartment.
Then this value is deleted and
the temperature display 1 indicates
the set temperature.
The alarm may switch on without any risk
to the frozen food
■
when the appliance is switched on,
■
when large quantities of fresh food are
placed in the appliance,
■
if the freezer compartment door is
open too long.
Switching off the alarm
Fig.
2
Press the alarm button 4 to switch off
the warning signal.