Siemens GI38NP60 - Manual (Page 22)

22
Switching on
the appliance
Fig. 1
Switch on the appliance with the main
switch 5.
Fig. 2
A warning signal sounds and alarm
button 1 and the temperature display
flash.
Press alarm button 1 to switch off the
warning signal.
The alarm button is lit and the
temperature displays flash until the
appliance has reached the set
temperatures.
Operating tips
S When the freezer compartment has
reached its operating temperature,
the temperature display lamp is lit
continuously.
S The sides of the housing are sometimes
heated slightly. This prevents
condensation in the area of the door
seal.
S If you cannot open the freezer
compartment door immediately after
closing it, wait 2ć3 minutes until the
partial vacuum has equalised.
S The fully automatic Nofrost system
ensures that the freezer compartment
remains free of ice. Defrosting is no
longer required.
Selecting the
temperature
Fig. 2
Freezer compartment
(can be selected from -16 °C to -24 °C)
Keep pressing temperature selection
button 3 until the required freezer
compartment temperature is set.
The value last selected is stored.
The set temperature is indicated on
display 4.
We recommend a setting of -18 °C in the
freezer compartment.
Warning signal
Switching off the warning
signal
Fig. 2
If the Alarm button 1 is pressed,
the warning signal switches off and the
display is reset to standby.
Door warning signal
The door warning signal switches on if the
appliance door is left open for longer than
half a minute. A longĆterm warning signal
sounds.
Temperature warning
The temperature warning signal switches
on if the freezer compartment is too
warm. A beeping signal sounds.
en