Asus A7V266-MX - Manual (Page 54)

2-24 Chapter 2: BIOS Information
Video Off Method [V/H Sync+Blank]
This field defines the video off features. The Display Power Management System
(DPMS) feature allows the BIOS to control the video display card if it supports the
DPMS feature. [Blank Screen] only blanks the screen. Use this for monitors without
power management or “green” features. Configuration options: [V/H Sync+Blank]
[Blank Screen] [DPMS support]
PWR Button < 4 Sec [Instant-off]
When set to [Instant-off], the ATX switch can be used as a normal system
power-off button when pressed for less than 4 seconds. [Suspend] allows the
button to have a dual function where pressing less than 4 seconds puts the system
in sleep mode. Regardless of the setting, holding the ATX switch for more than 4
seconds powers off the system. Configuration options: [Instant-off] [Suspend]
Run VGA BIOS if S3 Resume [Auto]
Configuration options: [Auto] [Yes] [No]
AC Loss Auto Restart [Previous State]
This allows you to set whether or not to reboot the system after AC power loss.
[Off] leaves your system off while [On] reboots the system. [Previous State] sets
the system back to the state it was before the power interruption.
Configuration options: [Previous State] [On] [Off]
C.O.P. Control [85 degree]
Sets the threshold value for the CPU temperature. The ASUS CPU Overheating
Protection (C.O.P.) feature of this motherboard automatically shuts down the
system when the CPU temperature reaches or exceeds the threshold value.
Configuration options: [85 degree] [95 degree]